Skid Steer 7-14 Pin Converter Module (4 Function) - Deutsch DT Connectors

Skid Steer 7-14 Pin Converter Module (4 Function) - Deutsch DT Connectors

This module allows for easy compatibility between Skid Steer Loaders with a 7 Pin connection and attachments with a 14 Pin connection. This is set up for 4 functions to turn on with the up and down joystick buttons on the left and right sides of the cab.

The connectors are wired to standard Deutsch DT plugs typical for hydraulic valves on skid loaders.

• 8 foot overall cable length

• Designed for use with Bobcat Skid Steer Loaders

• Control module used in this assembly is CAN 2.0 A and B rated.

• Rated amps per output is 2 amps continuous / 3 amps for 5 min.

• Short Circuit and Reverse Polarity Protected.

• 6-33 Volts DC.

• 10 Amp overcurrent Protection

• -40 to 180F operating temp rated

Wire Colors:

Red/Black = Upper Left

Yellow/Brown = Lower Left

Green/Blue = Upper Right

White/Orange = Lower Right